2003:
NEW digital amplifier added to inventory 1.45Kw
RMS
Replacement pump fitted to Haze machine.
Main amplifier retired to back-up status.
New Digital Amplifier as Main Output source.
Equipment rack re-wired.
New Peavey HiSys speaker system added to inventory. 2.4Kw RMS
Sub-Woofer Amplifiers added to inventory. 2.1Kw RMS
Various light fittings re-mounted and tested.
Main digital playback unit upgraded and tested.
Replaced Speaker Cables.
Upgraded speaker outputs on Amplifier Rack.
Added New DMX controller to Lighting.
Added Martin Lighting effect.
Annual PAT Safety Testing on All Equipment.
Fitted New Cooling Fans to Amp Rack.
Retired current Laser Effects.
Replaced Lighting Rig with New Trussing.
Retired old Lighting Effects.
Added New Intelligent Lighting Effects.
Added New Lighting Controllers.
Replaced ALL Lighting Cables.
2004:
Upgraded lighting
Effects.
Renewed Lighting Clamps.
Two
New Amplifier Flight Cases Added.
Added Two New Intelligent Lighting Effects.
PAT Safety Tested New Lighting Effects.
Renewed Remaining Lighting clamps.
Renewed DMX & Power Cables for Lighting.
Added Two New Intelligent
Lighting Effects.
Added additional 16-Amp power distribution outlets.
Upgraded intelligent lighting power cables.
Added new lighting flight case.
Added new intelligent
lighting controller.
Added new intelligent lighting signal cables.
Added new Cable Carry case with addition of Adaptor Assortment.
Added new Peavey Active crossover to processing rack.
Replaced amplifier connecting leads.
Re-introduced Par Cans into current Lighting Line-up.
Replaced Playback - Rack linkage leads.
Fitted new speakon plugs to sub-woofer cables.
Retired Fog Machine.
Retired Haze Machine.
Added new Tri-Lite Trussing system to lighting Line-up.
Added new Winch-Up Lighting Stands.
Added new Fog/Haze Machine.
Updated Active crossover control.
Added new Peavey Sub Woofers to Audio Line-up. (4Kw rms rating)
Added new Stand Alone DMX control Unit.
Annual PAT Testing of ALL electrical equipment.
Re-introduced UV Lighting into current Lighting Line-up.
Added new Master DMX control Unit.
Added new Mains Cable Extension Reel.
2005:
Arcline Strobe Tubing Added.
Arcline Strobe Controller Added.
2 New Intelligent DMX Fixtures Added.
ZR22-DMX Effects Unit Serviced.
DMX Controller Serviced and Upgraded.
New Flight Case Added.
DMX Lighting routine maintenance and cleaning.
New Lighting and Power Cables purchased.
Added New Mains distribution.
Added New Amp/Processing Rack.
Added New Cables for lighting control.
Added Two Discharge Moving Heads.
Added Two New Lighting Flight Cases.
Added New Mains Distribution.
Added New high Power Laser Show System.
Added New Dual Microphone System.
Added New Mains Distribution.
Retired Sub Woofers from Line up.
Retired Active Crossover from Amp/Processing Rack.
Added more Discharge Moving Heads.
Added New DMX Control Cables.
Upgraded Discharge Moving Heads to Single Arm Types.
Added New DMX Control Cables.
Serviced Control Cables.
Pre-wired Tri-lite Trussing.
Added New Mood Lighting - Flame Lights.
Annual PAT Safety Testing Carried Out.
Added New Power Amplifier.
Added New Pair of Sub Woofers.
2006:
Retired Sub Woofers from Line up.
Retired DMX Scanners from Line up.
Retired DMX Moonflowers from Line up.
Replaced Various DMX Data Cables.
Introduced New Haze effects Unit.
Added New Speaker Cables.
Re-wired Trussing system.
Added New Martin Audio PA System to main Line up.
Added 3 New PA Amplifiers to Line up.
Added 2 New DMX Discharge Scanners to Line up.
Added 2 New DMX Discharge Barrel Effects to Line up.
Added 2 New DMX Moonflowers to Line up.
Updated DMX control Gear.
Added 2 New Discharge Moving Heads to Line up.
Re-Programming of ALL DMX routines.
Programming Moving Heads for Remote Positioning.
Renewed all overhead safety wires for lighting.
Upgraded Main Playback Unit.
Upgraded Amp/Processing Rack.
Upgraded signal Interface Cables.
Re-covered speakers
Retired flame effect lights from inventory.
Added New Speaker Stands to Inventory.
Adjusted Lighting Trusses to aid in faster setting up.
Retired Mono-Block Amplifiers.
Retired Back Up Amplifiers.
Added New Digital Amplifier.
Retired Power Cables.
Added New Power Cables.
Retired Compressor / Limiter.
Re-wired main Processing Rack.
Re-wired Speaker Connections.
Re-Built Main Processing Rack.
Re-Built Main Digital Amplifier Rack.
Re-Wired Main Playback Rack.
Added New LED Lighting Units.
Added New Cable Storage / Tool Box.
2007:
Added New Lighting.
Re-Wired Lighting Control.
Added New
Digital Speaker Management Unit.
Retired Martin Audio Controller.
Updated lighting programs.
Updated Audio Link-up Cables.
Added New Microphone to Line up.
Added Flight Cased Effects system.
Routine Maintenance on Main Playback Unit.
Added New Denon Dual CD Back-up Player.
Retired Digital Speaker Management Unit.
Added New Crown digital Amplifier.
Added New Crown digital Amplifier.
Added New Mains cables.
Re-wired
Amp and Processor Rack.
Streamlined Cable Setup to Minimise Setup Time.
Annual PAT Safety Testing Carried Out.
Retired Lighting Stands.
Replaced Lighting Stands.
Added a third Back-up lighting stand with T-Bar.
2008:
Replaced Discharge Lamps.
Rewired Strobe Tubing.
Replaced pump for effects unit.
Added New LED Uplighting.
Added New cables for LED Uplighting.
Annual LED Uplighting PAT Testing Carried Out.
Added New Laser Effects Unit.
Annual PAT Safety Testing Carried Out.
Replaced Speakon Plugs.
Replaced Microphone Cable.
2009:
Added New LED Uplighting.
Added Custom LED Uplighting Looms.
Annual LED Uplighting PAT Testing Carried Out.
Added Back-up Power Supply - for use in Marquees etc.
Retired Haze Machine.
Annual PAT Safety Testing Carried Out.
Lighting Stands Serviced and Polished.
Main Mixer Power Supply upgraded.
2011:
Added New LED Uplighting Looms.
Added New Extensions for LED Uplighting Cables.
Annual LED Uplighting PAT Testing Carried Out.
Please note:
we always keep our equipment in top working order,
and because of this sometimes we have to substitute equipment during
maintenance periods.